Skip to main content
Surfaces
CommandStation Offset CommandDifficultyintermediateAdded2027.0Statusdraft

Points Station Offset Command

This command assigns an alignment name, station and offset to COGO points. If a drawing is based on the Devotech template, COGO points will have Alignment, Offset and Chainage properties:

When to use this function​

Use this function when you need to:

  • [Scenario].

Before you begin​

  1. [Prerequisite or preparation step].

Start the command​

Enter Station Offset Command at the Civil 3D command line.

Location on Compact Ribbon:

Location on Extended Ribbon:

Procedure​

  1. Run the command.
  2. Select the COGO points you want to assign values to, and press Enter. If you only want to use points from a specific group, select the required group in the opened window, select an alignment name and click OK.

The values are saved to the point's properties:

Currently, the values do not update dynamically. If any changes are made to the points or alignments, the user must rerun the command to reflect the updates.

Expected result​

[Describe the observable successful outcome.]

Troubleshooting​

[Symptom]​

[Actionable resolution.]

  • [Link to a directly relevant topic]