145 docs tagged with "commands"

Displays details of the specific version of Devotech iDAS which is installed.

There are two types of ribbon sets available.

This command adds a one millimeter gap between the corridor regions.

Adds drawing objects from either the current drawing or an external drawing to a surface, or creates a new surface from the selected objects.

1. Run the command.

AutoCAD command that scales and rotates object to other objects.

Adds labels (alignment and segment) to multiple alignments at once.

Converts multiple polylines to alignments at the same time.

Opens the Devotech iDAS assemblies drawing that contains various assemblies and subassemblies.

Converts a polyline or an alignment into a bulk water pipeline.

Creates watersheds, catchment and flow path polylines from a surface.

Imports alignment label set for multiple alignments at once.

Adds pipes and structures along the alignments, adds crossing pipes and removes pipes and structures from the profile views within the profile view visible area.

Highlights the chainages where the minimum or maximum cover (difference between two profiles) is exceeded.

Converts points text file between two coordinate systems defined in Civil 3D (Map 3D).

Copies boundaries from one surface to another surface.

Copies a surface elevation analysis from a source surface to multiple destination surfaces.

Splits a new or existing corridor into multiple drawings.

Splits the project into multiple drawings, it is used for long projects.

The profile view bands settings (Profile 1 and Profile 2) can also be specified in the Corridor Wizard.

Creates curb return polylines which can be used with the T-intersection Wizard.

This command deletes all empty sites from the current drawing.

Extracts feature lines from corridors and drapes them on a selected surface.

This command creates a volume surface and COGO points for cut/fill depths.

Changes the road width if the width is driven by the offset alignments.

Explodes a polyline into lines while retaining Map 3D object data.

Exports profile view band set settings to an .xml file, it can then be imported using the Import Band Settings command.

1. Run the command.

Exports Civil 3D parcels to SSA (Storm and Sanitary Analysis) or EPA SWMM as catchments.

Exports a pipe network branch to a text file.

Elevations from multiple profiles are exported to a CSV file.

Exports a surface to a Model Maker TOT file.

Extracts corridor feature lines as 3D polylines.

Extracts surfaces along an alignment at an interval.

Large surfaces might slow down certain processes, this command speeds up the design process by extracting a new surface from the original surface and simplifying it.

AutoCAD Civil 3D command to extend a surface by interpolating points.

Sets the pipe direction to ensure all the pipes flow towards the outfall.

Adds polylines to an existing or new corridor as bellmouth (curb return) quadrants.

Automates the plan production for roads and pipe networks.

Creates plan and profile view drawings from a master drawing.

Opens the Devotech iDAS getting started webpage.

This command can grade a profile between two selected points of vertical intersection (PVIs).

Opens the Devotech iDAS and Civil 3D help resources.

Opens the Devotech iDAS and Autodesk Civil 3D Help PDF.

Automatically creates house connections for water reticulation networks.

The profiles from pipes must be recreated every time there is a change in the network.

Creates a network from a 12DA (or 12DAZ) file containing drainage and super strings.

Imports 3D faces from another drawing that fall within a polyline.

Imports a horizontal alignment from a .csv file.

Imports ARR data and creates rainfall time series patterns to be used by the TUFLOW analysis.

This command imports a band set to multiple profile views at one time.

This command imports profile view band set settings from an .xml file that was created with the Export Band Settings command.

Creates a sewer pipe network from a Civil Designer sewer network file (.txt file).

Creates a stormwater pipe network from a Civil Designer stormwater network file (.txt file).

Creates a water pipe network from a Civil Designer water network .asc file.

Imports lines and/or COGO points from a ModelMaker CDM file.

Creates a pipe network from a .csv file, which contains Chainage and invert Elevations (CE).

Creates a pipe network from multiple CSVs.

Imports a CSV file as network parts.

Creates culverts from a CSV file.

In South Africa surveyors often provide designers with surface data in a .dat format.

Imports a sewer or stormwater network from a EPA SWMM INP file (.inp).

Imports a water network from a EPANET INP file (.inp).

Imports points from a Garmin GPX file.

Imports points from a Juno device.

Imports catchments from SSA or EPA SWMM to Civil 3D as parcels.

Easily create a network from line and/or point shapefiles.

Create a pipe network from TechnoCAD Pipe Mate data.

Creates a pipe network from TechnoCAD Pipe Mate data.

Imports a ModelMaker Total (TOT) file.

Checks the level differences between the main and side roads at the intersecting points.

Where two corridors meet it creates a main road top surface profile in the side road profile view, adds a PVI to the side road vertical alignment at the location where the main road edge is, and moves this PVI and the start or end of the ve...

Automatically adds a junction type into the structure properties.

Calculates the layerwork quantities for a surface.

AutoCAD command that creates a polyline from the extents of selected objects.

1. Run the command.

1. Run the command.

AutoCAD Civil 3D command for cleaning up CAD entities, such as breaking multiple crossing lines.

Modify multiple Profile and Section Views by adjusting datums, heights and positions.

Moves multiple COGO point labels simultaneously to reduce the number of overlapping labels.

Interactively moves multiple sample lines at an increment along an alignment.

Zooms to where a specific pipe or structure is in the plan or any profile view.

Creates offset points from the points which are already on the alignment.

The parcel manager displays a parcel list according to their usage.

The Pipe Manager is a tool for working with the pipe networks.

Swaps multiple pipes at the same time.

Opens the plot styles folder that contains plot styles that can be used with Devotech Civil 3D templates.

Creates a COGO point array from a surface within a polyline's extents.

The example below describes the workflow for road rehabilitation project to trace the existing horizontal and vertical alignment.

1. Run the command.

Assigns elevations to polylines from the text which overlaps with the polyline or which is close to the polyline.

Creates a profile from a corridor feature line that is dynamically linked to a corridor (the standard Civil 3D only allows static profiles from corridor feature lines so if any changes are made to the corridor, the profiles must be recreate...

Creates profiles from pipes automatically.

Creates multiple profile views from alignments at one time.

Creates a new network for sewer house connection only (house connection structure and house connection pipe) and projects the house connection pipes to all the profile views at once.

Performs the calculations required for a rainwater tank to a design specification or by custom properties specified by the user.

Raises or lowers multiple COGO points with the specific amount, or sets an elevation for multiple COGO points.

Sets the automatic rebuild option for all corridors, users don't need to do it one by one.

This command rebuilds the corridors of selected horizontal alignments, profiles and corridors.

This command updates the feature line profiles created with the Profile Feature Line Command.

Refreshes Profile Views after splitting or moving, forcing the profile view to display correctly.

Register the Devotech iDAS to unlock the commands.

Regrades a pipe network according to design parameters.

Deletes all 3D faces outside the extents of a polyline.

Renames alignments more efficiently than standard Civil 3D options.

Updates pipes' and/or alignment's names or descriptions with the station of an alignment that crosses the pipe or alignment.

This command renames the profile views using the first and the last structure names.

Renames alignments using the first and the last structure names.

Renames points sequentially according to the defined settings.

Devotech iDAS windows, e.g.

Reverses multiple alignments at the same time.

Reverses multiple profiles at the same time.

Opens the Devotech iDAS road design folder that contains design information such as additional design criteria files.

Utilizes LIDAR data which was captured with a video.

Assists in the rehabilitation of roads.

Assists in the rehabilitation of roads.

Rotates a north arrow block in a layout to match the viewport rotation.

Rotates objects 180 degrees around the drawing origin.

1. Run the command.

Changes the length of multiple profile views.

Creates a sewer network from multiple objects (polylines or lines).

Smooths a profile based on a surface.

Creates a sewer network from multiple objects (polylines or lines).

Opens the Devotech iDAS stormwater design folder that contains additional design data such as IDF curve information.

Moves a structure in the profile view.

Opens the Devotech website on how to get support for Devotech iDAS.

Opens the Devotech iDAS support folder containing support data such as templates, design references, assemblies, etc.

Creates a surface from the pipe network structure rim elevations.

Creates a survey grid within a polyline's extents.

Performs the calculations required for a swale to a design specification or by custom properties specified by the user.

Swap the pipe start and end points or change the pipe flow direction method which defines the direction of the slope arrow label.

Checks for structures with only one pipe connection.

Toggles the iDAS ribbons between Compact and Extended styles.

Creates a T-intersection between two corridors automatically.

Opens the Devotech iDAS Civil 3D templates folder.

Updates the profile view bands with bend values and pipe 3D lengths.

Opens the Devotech's website with Devotech iDAS training videos.

Creates a table from a volume surface showing the cut and fill quantities.

Creates multiple water drops from a surface within multiple polylines.

Converts AutoCAD objects like lines and polylines into a pipe network.

Opens Devotech's website.

Weeds a pressure network profile.

Opens Devotech's website with information about Devotech iDAS new features, and development of the latest release.

This command zooms to the alignment of the selected profile view.

Zooms to a profile view of a selected alignment.